Security cable slot bracket
Description
Spare part number
Security cable slot bracket
818115-001
Before removing the security cable slot bracket, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 27
).
Remove the RJ45 cover:
1.
Disconnect the battery cable from the system board.
2.
Remove the two Phillips PM2.5×8.8 screws (1) that secure the security cable slot bracket to
the top cover.
50
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
