2.
Remove the left speaker (2).
Reverse this procedure to install the left speaker.
Card reader board
Description
Spare part number
Card reader board
NOTE:
The card reader board spare part kit does not include the card reader board cable. The card
reader board cable is available using spare part number 818106-001.
818122-001
Before removing the card reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 27
), and then remove the following components:
a.
Battery (see
Battery on page 37
)
b.
Fan (see
Fan on page 46
)
c.
RJ45 cover (see
RJ45 cover on page 48
)
d.
Security cable slot bracket (see
Security cable slot bracket on page 50
)
e.
System board (see
System board on page 51
)
f.
Left speaker (see
Left speaker on page 58
)
Remove the card reader board:
Component replacement procedures
59
