Subwoofer
Description
Spare part number
Subwoofer (includes subwoofer cable, front speaker passthrough cable, and 2 rubber isolators)
681996-001
Before removing the subwoofer, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 47
), and then remove the following components:
a.
Hard drive (see
Hard drive on page 48
)
b.
Optical drive (see
Optical drive on page 53
)
c.
Keyboard (see
Keyboard on page 59
)
d.
Top cover (see
Top cover on page 63
)
e.
System board (see
System board on page 77
)
Remove the subwoofer:
1.
Release the subwoofer cables
(1)
from the clips
(2)
and routing channel built into
the base enclosure.
2.
Remove the two Phillips PM2.5×10.0 screws
(1)
that secure the subwoofer to the base enclosure.
Component replacement procedures
89
Summary of Contents for ENVY dv7-7200
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
Page 30: ...Computer major components 22 Chapter 3 Illustrated parts catalog ...
Page 129: ......
