background image

WLAN module

Description

Spare part number

Qualcomm Atheros AR9565 802.11b/g/n 1×1 WiFi + BT 4.0 Combo Adapter for use only on
computer models equipped with an AMD processor

733476-001

For use only on computer models equipped with an Intel processor:

Broadcom BCM43142 802.11 bgn 1x1 Wi-Fi + BT4.0 HMC Combo Adapter

753076-001

Intel Dual Band Wireless-AC 7260 802.11 ac 2×2 WiFi + BT 4.0 Combo Adapter

756753-001

Intel Dual Band Wireless-AC 3160 802.11ac 1×1 WiFi + BT 4.0 Combo Adapter

710662-001

Ralink RT3290LE 802.11b/g/n 1×1 WiFi and Bluetooth 4.0 Combo Adapter

690020-001

Realtek RTL8188EE 802.11bgn Wi-Fi Adapter

709848-001

CAUTION:

To prevent an unresponsive system, replace the wireless module only with a wireless

module authorized for use in the computer by the governmental agency that regulates wireless devices

in your country or region. If you replace the module and then receive a warning message, remove the

module to restore device functionality, and then contact technical support.

Before removing the WLAN module, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the battery (see 

Battery on page 37

).

Remove the WLAN module:

1.

Close the computer.

2.

Turn the computer upside down with the front toward you.

3.

Loosen the Phillips PM2.5×5.0 captive screw 

(1)

 that secures the service cover to the computer.

4.

Lift the back edge of the service cover 

(2)

 until it detaches from the computer.

38

Chapter 5   Removal and replacement procedures for Customer Self-Repair parts

Summary of Contents for ENVY m6









































































































Reviews: