b.
Detach the wireless antenna transceivers
(2)
from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided adhesive.)
c.
Remove the wireless antenna.
The wireless antenna are available using spare part number 720532-001.
Reverse this procedure to reassemble and install the display assembly.
Fan
Description
Spare part number
Fan (includes cable)
720235-001
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 37
), and then remove the following components:
a.
Service cover (see
WLAN module on page 38
)
b.
Hard drive (see
Hard drive on page 41
)
c.
Base enclosure (see
Base enclosure on page 48
)
d.
Display assembly (see
Display assembly on page 51
)
Component replacement procedures
59
