4.
Press and hold the Connect button
(3)
for 5 to 10 seconds, until the LED on the receiver lights
up or stops flashing.
Audio problems
No sound is produced
●
Be sure that you connected powered speakers and that they are turned on.
●
Adjust the volume, either on the speakers or through the computer operating system.
●
Turn off your computer, and then unplug and reconnect the speakers. Be sure that the speakers
are properly connected.
●
Unplug headphones if they are connected to your computer (or speaker system).
●
If the computer is in the Sleep state, exit Sleep by briefly pressing the power button.
●
Check the audio functions.
To check the audio functions on your computer, follow these steps:
1.
From the Start screen, type
c
, and then select
Control Panel
.
2.
Select
Hardware and Sound
, and then select
Sound
.
3.
When the Sound window opens, click the
Sounds
tab. Under
Program Events
, select any
sound event, such as a beep or alarm, and click the
Test
button.
You should hear sound through the speakers or through connected headphones.
To check the recording functions on your computer, follow these steps:
1.
From the Start screen, type
s
, and then select
Sound Recorder
.
2.
Click
Start Recording
and speak into the microphone. Save the file to your Windows desktop.
3.
Open a multimedia program and play back the sound.
NOTE:
To confirm or change the audio settings on your computer, from the Start screen, type
c
,
and then select
Control Panel
. Select
Hardware and Sound
, and then select
Sound
.
Audio problems
51
Summary of Contents for ENVY Rove 20-k000
Page 1: ...User Guide ...
Page 4: ...iv Safety warning notice ...