10
3.2
Driving Safety
Menu option
Description
Available option
Motion Detection
Enable/Disable the motion
detection. If this function is
enabled and power off the
camcorder, the system
alert message, “Press OK
Key to Power off, or enter
motion detection after
10sec.”, will pop on the
screen. Under motion
detection mode, the
camcorder will
automatically start
recording when any object
movement is detected.
On / Off
Collision
Detection
Enable / Disable the
collision detection. If this
function is enabled and any
collision is detected, the
camcorder will
automatically trigger the
emergency recording.
High Sensitivity /
Normal Sensitivity /
Low Sensitivity / off
LDWS
When the LDWS is on,
satellite positioning is set,
and the vehicle is moving at
the set speed, if the vehicle
starts drifting out of the
lane, the camcorder will
sound an alert, and a
warning image will be
displayed as a reminder.
Off / 70 / 80 / 90
Headlight
Warning
When Headlight is
activated, camcorder will
issue a voice alert and an
alarm screen reminding
that insufficient brightness
is sensed on the recording
face.
On / Off
The following driving safety function is for reference only. Drivers are
advised to exercise discretion based on actual road conditions.