13
3.1.3
Emergency Recording
Start the Emergency Recording, do the following:
1.
During video recording, touch
to enter emergency
recording mode, the “Emergency”
message will be shown
immediately on the lower left
corner of the screen, and the
recorded file will be protected.
2.
Touch
again, to halt the recording.
Note:
1. If the
Collision Detection
function is enabled and a collision is detected, the
camcorder will automatically trigger the emergency recording.
2. The emergency recording file is created as a new file, which will be protected to
avoid being overwritten by normal looping recording. 8G (or above) memory card
can save up to 8 emergency video files. The alert message of “
Emergency files are
full
” will pop up on the screen when the emergency recording files are full, and the
oldest emergency file will be automatically deleted when a new emergency
recording file is created.
