26
3.5
Parking Mode
To monitor the vehicle when it is parked, you can activate
Motion
Detection,
or
Vibration Detection
.
Follow the steps below to change the settings for Parking Mode:
1.
Press the
button to
enter the main menu.
2.
Press the
or
button to select
Parking
Mode
, and then press the
button to confirm.
3.
Press the
or
button to configure Parking Mode (Motion
Detection / Vibration Detection / Off), and then press the
button to complete setting.
4.
Press the
button to return to recording screen.
3.5.1
Using embedded battery of car camcorder
•
Motion Detection:
-
If disconnected external power supply when the camcorder is
powered on, the system alert message “
Press OK to power off
or enter Parking mode after 10 sec.
” This means the system
will enter Motion Detection automatically in 10 seconds, and
then LCD screen turns off (the camcorder will turn off the screen
temporarily, but still in standby detection status. Press any
button to turn on the operation screen and resume to normal
loop recording).
-
In the Motion Detection mode, when the camcorder detects any
motion in front of lens, the automatic record will be activated.
-
In this mode, when the camcorder detects any motion in front of
lens, the video recording will be triggered and the event will be
recorded for 10 seconds (per file). If the event lasts more than
10 seconds, the camcorder will keep recording up to 2 minutes.
