background image

About this Guide 

The content in this document is for information purpose and is subject to 
change without prior notice. We have made every effort to ensure that 
this User Guide is accurate and complete.   
However, no liability is assumed for any errors or omissions that may 
have occurred.   
The manufacturer reserves the right to change the technical 
specifications without prior notice. 

FCC Statement 

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generate, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged 
to try to correct the interference by one or more of the following 
measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 
FCC Caution: Any changes or modifications not expressly approved by the 
party responsible for compliance could void the user's authority to 
operate this equipment.

       

Summary of Contents for f870g
















































Reviews: