26
3.4
Driving Safety
Note:
1. The
Driving Safety
function is limited to triggering no more than two alarms at the
same time. If a voice and alert message have been triggered, any other alarm will
be ignored until either of the two is settled.
2. Satellite positioning must be completed before functions such as
Speed Cam Alert
,
Speed Position Management
,
Speed Limit Alert
,
LDWS
and
FCWS
to be enabled. Be
sure to check that Satellite positioning has been completed prior to using the
product.
3. The detections of
LDWS
,
FCWS
and
FCMD
may be inaccurate when used in rain, at
night or in environments of insufficient lighting. Drivers are advised to exercise
discretion based on actual road conditions.
3.4.1
Speed Cam Alert
If the
Speed Cam Alert
function is enabled, once your car’s location is
determined by GPS and approaches a speed cam, this product produces
audible alert and screen message.
To enable the Speed Cam Alert, do the following:
1.
Press the
button to enter the OSD menu.
2.
Press the
/
button to
select
Speed Cam Alert
, and then
press the
OK
button for
entering function menu.
3.
Press the
/
button to
select
On
, and then press the
OK
button to enable the
function.
The following driving safety function is for reference only.
Drivers are advised to exercise discretion based on actual road
conditions.
