Set up backup fax reception
Depending on your preference and security requirements, you can set up the HP Fax
to store all the faxes it receives, only the faxes it receives while the device is in an
error condition, or none of the faxes it receives.
The following
Backup Fax Reception
modes are available:
On
,
On Error Only
, and
Off
.
●
On
is the default setting. When
Backup Fax Reception
is
On
, the HP Fax stores
all faxes it receives in memory. This enables you to reprint one or all of the most
recently printed faxes if they are still saved in memory.
Note 1
After the memory becomes full, the HP Fax overwrites the oldest,
printed faxes as it receives new faxes. If the memory becomes full of
unprinted faxes, the HP Fax will stop answering incoming fax calls.
Note 2
If you receive a fax that is too large, such a very detailed color
photo, it might not be stored in memory due to memory limitations.
●
On Error Only
causes the HP Fax to store faxes in memory only if there is an
error condition that prevents the HP Fax from printing the faxes (for example, if
the HP Fax runs out of paper). The HP Fax will continue to store incoming faxes
as long as there is memory available. (If the memory becomes full, the HP Fax
will stop answering incoming fax calls.) When the error condition is resolved, the
faxes stored in memory print automatically and are then deleted from memory.
●
Off
means that faxes are never stored in memory. (You might want to turn off
Backup Fax Reception
for security purposes, for example.) If an error condition
occurs that prevents the HP Fax from printing (for example, the HP Fax runs out
of paper), the HP Fax will stop answering incoming fax calls.
Note
If
Backup Fax Reception
is enabled and you turn off the HP Fax, all
faxes stored in memory are deleted, including any unprinted faxes that you
might have received while the HP Fax was in an error condition. You will need
to contact the senders to ask them to resend any unprinted faxes. For a list of
the faxes you have received, print the
Fax Log
. The
Fax Log
is not deleted
when the HP Fax is turned off.
To set backup fax reception from the control panel
1.
Press
Setup
.
2.
Press
4
, and then press
5
.
This selects
Advanced Fax Setup
and then selects
Backup Fax Reception
.
3.
Press to select
On
,
On Error Only
, or
Off
.
4.
Press
OK
.
Reprint received faxes from memory
If you set the
Backup Fax Reception
mode to
On
, the HP Fax stores faxes it
receives in memory, whether the device has an error condition or not.
Note
After the memory becomes full, the HP Fax overwrites the oldest,
printed faxes as it receives new faxes. If all the stored faxes are unprinted, the
HP Fax will not receive any more fax calls until you print or delete the faxes
User Guide
45
Fax
Summary of Contents for FAX 1250 Series
