background image

 

48 

Appendix D Cooling system 

The cooling system of the HP FlexFabric 5930 switches comprises the ventilation holes in the chassis, fan 

trays, and built-in fans of hot swappable power supplies. To guarantee that this cooling system can 

effectively work, you must consider the site ventilation design when you plan the installation site for the 
switches.  
The fan trays in the HP FlexFabric 5930-/HP FlexFabric 5930- TAA switch must be the 

same type: LSWM1HFANSC or LSWM1HFANSCB.  

 

When LSWM1HFANSC fan trays are used, cool air flows in through the air vents in the fan tray 
panel and the power supply panels, circulates through the chassis and the power supplies, and 

exhausts at the network port side, as shown in 

Figure 43

.  

 

When LSWM1HFANSCB fan trays are used, cool air flows in through the air vents in the network 
port-side panel and the power supply panels, circulates through the chassis and the power supplies, 

and exhausts through the air vents in the fan tray panels, as shown in 

Figure 44

Figure 43

 

Airflow through the HP FlexFabric 5930-/HP FlexFabric 5930- TAA 

chassis (with LSWM1HFANSC fan trays) 

 

(1) Power supply air vents  

(2) Fan tray air vents 

(3) Network port-side air vents 

 

 

Summary of Contents for FlexFabric 5930-32QSFP+





















































Reviews: