Accessing the switch for the first time
Setting up the configuration environment
The first time you access the switch you must use a console cable to connect a console terminal, for
example, a PC, to the console port on the switch, as shown in
.
Figure 22
Connecting the console port to a terminal
Connecting the console cable
A console cable is an 8-core shielded cable, with a crimped RJ-45 connector at one end for connecting
to the console port of the switch, and a DB-9 female connector at the other end for connecting to the
serial port on the console terminal.
Figure 23
Console cable
Main label
1
8
B side
B
Pos.9
Pos.1
A side
A
20
Summary of Contents for FlexFabric 7900 Series
Page 5: ...iii Index 53 ...
