WARNINGS
2
CABINET OPTION INSTALLATION INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
STEP 2
Place end panel in position. Insert supplied
screws (2) into the hole in the legs on both
sides of the end panel. Tighten screw until end
panel is secured. Do not over tighten. Tighten
just enough to hold end panel in position.
Repeat for other end panel.
STEP 1
Tighten all four nuts on the bottom shelf, and upright
the table with assistance from another person.
STEP 3
Remove lower door track on shelf with supplied
screw driver. Lay doors on shelf in the position they
will be installed.
STEP 4
At an angle, install the top of the two doors into the upper door track. Place the
lower track on the bottom of the two doors. Slide the lower track into the final
location and replace the screws in the lower track.
picture not available
picture
not
available
picture
not
available
STEP 5
Slide the doors back and forth to insure easy movement.
Repeat on other side.
