411
[PE-xcg-vpn1] quit
Verifying the configuration
# Verify that two AC forwarding entries exist on the PE.
[PE] display l2vpn forwarding ac
Total number of cross-connections: 1
Total number of ACs: 2
AC Xconnect-group Name Link ID
GE1/1/1 vpn1 0
Ser1/1/0 vpn1 1
# Verify that CE 1 and CE 2 can ping each other. (Details not shown.)
Configuring a static PW
Network requirements
Create a static PW between PE 1 and PE 2 over the backbone to allow communication between CE
1 and CE 2.
Figure 110 Network diagram
Table 39 Interface and IP address assignment
Device
Interface
IP address
Device
Interface
IP address
CE 1
GE1/1/1
100.1.1.1/24 P
Loop0
192.4.4.4/32
PE 1
Loop0
192.2.2.2/32
GE1/1/1
10.1.1.2/24
GE1/1/1
-
GE1/1/2 10.2.2.2/24
GE1/1/2
10.1.1.1/24
PE
2 Loop0
192.3.3.3/32
CE 2
GE1/1/1
100.1.1.2/24
GE1/1/1
-
GE1/1/2
10.2.2.1/24
Configuration procedure
1.
Configure CE 1.
<CE1> system-view
[CE1] interface gigabitethernet 1/1/1
[CE1-GigabitEthernet1/1/1] ip address 100.1.1.1 24
