123
•
In non-FIPS mode, the encrypted form of the key is a string of 1 to 373 characters. The plaintext
form of the key is a string of 1 to 255 characters.
•
In FIPS mode, the encrypted form of the key is a string of 15 to 373 characters. The plaintext
form of the key is a string of 15 to 255 characters. The plaintext string must contain digits,
uppercase letters, lowercase letters, and special characters.
single-connection
: The device and the primary HWTACACS accounting server use the same TCP
connection to exchange accounting packets for all users. If you do not specify this keyword, the
device establishes a new TCP connection each time it exchanges accounting packets with the
primary accounting server for a user. As a best practice, specify this keyword to reduce TCP
connections for improving system performance if the HWTACACS server supports the
single-connection method.
vpn-instance vpn-instance-name
: Specifies an MPLS L3VPN instance to which the primary
HWTACACS accounting server belongs. The
vpn-instance-name
argument is a case-sensitive string
of 1 to 31 characters. If the server is on the public network, do not specify this option.
Usage guidelines
Make sure that the port number and shared key settings of the primary HWTACACS accounting
server are the same as those configured on the server.
Two accounting servers specified for a scheme, primary or secondary, cannot have identical IP
address, port number, and VPN instance settings.
If the specified server resides on an MPLS L3VPN, specify the VPN instance by using the
vpn-instance vpn-instance-name
option. The VPN instance specified by this command takes
precedence over the VPN instance specified for the HWTACACS scheme.
You can remove an accounting server only when it is not used for user accounting. Removing an
accounting server affects only accounting processes that occur after the remove operation.
Examples
# In HWTACACS scheme
hwt1
, specify the primary accounting server with IP address
10.163.155.12, TCP port number 49, and plaintext shared key
123456TESTacct&!
.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary accounting 10.163.155.12 49 key simple 123456TESTacct&!
Related commands
display hwtacacs scheme
key
(HWTACACS scheme view)
secondary accounting
(HWTACACS scheme view)
vpn-instance
(HWTACACS scheme view)
primary authentication (HWTACACS scheme view)
Use
primary authentication
to specify the primary HWTACACS authentication server.
Use
undo primary authentication
to restore the default.
Syntax
primary authentication
{
ipv4-address
|
ipv6
ipv6-address
} [
port-number
|
key
{
cipher
|
simple
}
string
|
single-connection
|
vpn-instance vpn-instance-name
] *
undo primary authentication
Default
The primary HWTACACS authentication server is not specified.
Summary of Contents for FlexNetwork MSR Series
Page 1005: ...987 ...
