330
<Sysname> display port-security mac-address security interface gigabitethernet 1/0/1 vlan
1
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME
000d-88f8-0577 1 Security GE1/0/1 NOAGED
--- 1 mac address(es) found ---
Table 36 Command output
Field
Description
MAC ADDR
Secure MAC address.
VLAN ID
ID of the VLAN to which the port belongs.
STATE
Type of the MAC address added. This field displays
Security
for a
secure MAC address.
PORT INDEX
Port to which the secure MAC address belongs.
AGING TIME
Period of time before the secure MAC address ages out.
•
If the secure MAC address is a static MAC address, this field
displays
NOAGED
.
•
If the secure MAC address is a sticky MAC address, this field
displays the remaining lifetime in minutes. By default, sticky
MAC addresses do not age out, and this field displays
NOAGED
.
numbe
r mac address(es) found
Number of secure MAC addresses stored.
Related commands
port-security mac-address security
port-security authorization ignore
Use
port-security authorization ignore
to configure a port to ignore the authorization information
received from the authentication server (a RADIUS server or the local device).
Use
undo port-security authorization ignore
to restore the default.
Syntax
port-security authorization ignore
undo port-security authorization ignore
Default
A port uses the authorization information from the server.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
After a user passes RADIUS or local authentication, the server performs authorization based on the
authorization attributes configured for the user account. For example, the server can assign a VLAN.
If you do not want the port to use such authorization attributes for users, use this command to ignore
the authorization information from the server.
Summary of Contents for FlexNetwork MSR Series
Page 1005: ...987 ...
