473
Field
Description
Integrity
Authentication algorithm used by the security protocol.
Encryption
Encryption algorithm used by the security protocol.
Related commands
ipsec transform-set
display ipsec tunnel
Use
display
ipsec
tunnel
to display information about IPsec tunnels.
Syntax
display ipsec tunnel
{
brief
|
count
|
tunnel-id tunnel-id
}
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
brief
: Displays brief information about IPsec tunnels.
count
: Displays the number of IPsec tunnels.
tunnel-id tunnel-id
: Specifies an IPsec tunnel by its ID. The value range for the
tunnel-id
argument is
0 to 4294967295.
Usage guidelines
IPsec is a Layer 3 VPN technology that transmits data in a secure channel established between two
endpoints (such as two security gateways). Such a secure channel is usually called an IPsec tunnel.
Examples
# Display brief information about all IPsec tunnels.
<Sysname> display ipsec tunnel brief
----------------------------------------------------------------------------
Tunn-id Src Address Dst Address Inbound SPI Outbound SPI Status
----------------------------------------------------------------------------
0 -- -- 1000 2000 Active
3000 4000
1 1.2.3.1 2.2.2.2 5000 6000 Active
7000 8000
Table 73 Command output
Field
Description
Src Address
Source IP address of the IPsec tunnel.
For IPsec SAs created by using IPsec profiles, this field displays two hyphens
(
--
).
Dst Address
Destination IP address of the IPsec tunnel.
For IPsec SAs created by using IPsec profiles, this field displays two hyphens
(
--
).
Summary of Contents for FlexNetwork MSR Series
Page 1005: ...987 ...
