Remove the system board:
1.
Disconnect the following cables from the system board:
(1):
Speaker cable
(2):
Power connector cable
(3):
Display cable
(4):
Touchpad cable
(5):
Audio/USB board cable
(6):
Keyboard cable
2.
Remove the cable from atop the right speaker, and then lift the speaker aside to gain access to the
screw underneath.
3.
Remove the five Phillips PM2.5×3.0 screws that secure the system board to the base enclosure
(1)
.
4.
Lift up on the left side of the system board
(2)
until it rests at an angle.
38
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
