Display assembly
NOTE:
The HP Chromebook 11 G5 model touch displays, spare part number 901252-001, are only spared as
full hinge-ups.
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the computer feet (see
).
5.
Remove the keyboard/top cover (see
).
6.
Remove the WLAN module (see
).
7.
Remove the Hall sensor board (see
8.
Remove the connector board and cable (see
Connector board and cable on page 29
).
9.
Remove the battery (see
10.
Remove the speakers (see
Remove the display assembly:
1.
Remove the two Phillips PM2.4×5.7 screws (1) that secure the display assembly to the base enclosure.
2.
Remove the display assembly (2).
3.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
Component replacement procedures
37
