Power connector and cable
Description
Spare part number
Power connector and cable
808155-013
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the computer feet (see
).
5.
Remove the keyboard/top cover (see
).
6.
Remove the WLAN module (see
).
7.
Remove the Hall sensor board (see
8.
Remove the connector board and cable (see
Connector board and cable on page 29
).
9.
Remove the battery (see
10.
Remove the speakers (see
11.
Remove the system board (see
12.
Remove the heat sink (see
).
13.
Remove the display assembly (see
Remove the power connector cable:
1.
Disconnect the power connector cable (1) from the system board.
2.
Remove the power connector and cable (2).
Component replacement procedures
43