background image

 Lights-Out 

DOS 

Utility 

251 

 

                          

Command Line Argument 

Description 

/HELP or /? 

Displays simple help messages 

/DETECT 

Detects the iLO management processor on the target server 

/RESET 

Resets the iLO management processor 

/VIRT_FLOPPY           

Ignores the virtual floppy inserted error 

/MIN_FW-xxx 

Enables you to set the minimum firmware version on which 
the iLO management processor runs 

/GET_STATUS            

Returns the status of the iLO management processor 

/GET_HOSTINFO 

Retrieves and displays the current host server information on 
the iLO management processor and displays the server 
name and number 

/GET_USERINFO 

Obtains the current users stored in the iLO management 
processor board and displays the names, login names, and 
security mask information 

/GET_NICCONFIG 

Retrieves and displays the NIC settings stored in the iLO 
management processor 

/GET_DHCPCONFIG 

Retrieves and displays the DHCP settings stored in the iLO 
management processor 

/GET_DIRCONFIG 

Retrieves and displays the DIRECTORY settings in the iLO 
management processo 

/WRITE_XML=path\file 
name.ext 

Reads the settings on the iLO management processor and 
writes the NIC, DHCP, DIRECTORY, and user settings into 
an XML hardware configuration script file 

/LOAD_XML=path\file name.ext 

Loads the script file and applies its changes to the current 
configuration on the iLO management processor 

/VERIFY_XML 

Verifies the accuracy of the script file and generates an error 
message for any incorrect data 

 

 

 

Summary of Contents for HP Integrated Lights-Out



























































































































































































































































































































































































































Reviews: