manualshive.com logo in svg

HP HP-UX 11i, Administrator'S Manual

The HP HP-UX 11i Administrator's Manual is an essential resource for managing your HP-UX 11i operating system. This comprehensive manual provides detailed instructions and insights for system administrators. Download this manual for free from our website 88.208.23.73:8080 to enhance your efficiency and expertise in HP-UX administration.

Share
Download
background image

Moving and Reconfiguring Your Disks.......................................................................................70

Moving Disks Within a System.............................................................................................71
Moving Disks Between Systems............................................................................................72
Moving Data to a Different Physical Volume...........................................................................73

Moving a Root Disk to Another Disk.................................................................................73
pvmove Command Syntax..............................................................................................74

Moving Data for Disk Space Balancing: Auto Re-balancing.....................................................75
Creating a Spare Disk........................................................................................................76
Reinstating a Spare Disk.....................................................................................................77
Modifying Physical Volume Characteristics............................................................................77

Handling Size Increases.................................................................................................78
Handling Size Decreases...............................................................................................84
Supported LUN Changes per Release..............................................................................84
Changing Physical Volume Boot Types.............................................................................84

Disabling a Path to a Physical Volume..................................................................................87
Creating an Alternate Boot Disk...........................................................................................88
Mirroring the Boot Disk.......................................................................................................90

Mirroring the Boot Disk on HP 9000 Servers.....................................................................90
Mirroring the Boot Disk on HP Integrity Servers.................................................................92

Migrating a Volume Group to New Disks: vgmove......................................................................95

Example of Migrating a Volume Group to New Disks.............................................................95

Migrating a Logical Volume to New Disks: lvmove......................................................................96
Administering File System Logical Volumes.................................................................................97

Creating a File System........................................................................................................97
Extending a File System......................................................................................................98
Reducing the Size of a File System........................................................................................99
Backing Up a VxFS Snapshot File System............................................................................101

Administering Swap Logical Volumes.......................................................................................101

Creating a Swap Logical Volume.......................................................................................102
Extending a Swap Device.................................................................................................102
Reducing the Size of a Swap Device...................................................................................102

Administering Dump Logical Volumes......................................................................................102

Creating a Dump Logical Volume.......................................................................................102
Removing a Dump Logical Volume.....................................................................................103

Creating and Administering Snapshot Logical Volumes..............................................................103

Types of Snapshots...........................................................................................................103
Creating a Snapshot Logical Volume..................................................................................104
Removing Snapshot Logical Volumes..................................................................................104
Displaying Snapshot Information........................................................................................104

Managing the lvmpud Daemon..............................................................................................105
Hardware Issues...................................................................................................................106

Integrating Cloned LUNs...................................................................................................106

4 Troubleshooting LVM...............................................................................107

Troubleshooting Overview......................................................................................................107

Information Collection.......................................................................................................107
Consistency Checks..........................................................................................................108
Maintenance Mode Boot..................................................................................................108

I/O Errors...........................................................................................................................109

Recoverable Errors...........................................................................................................109

Temporarily Unavailable Device....................................................................................110
Permanently Unavailable Device....................................................................................110

Nonrecoverable Errors......................................................................................................110

Media Errors..............................................................................................................111
Missing Device When the Volume Group Was Activated..................................................111

Contents

5

Summary of Contents for HP-UX 11i

























































































































































































Reviews:

No comments

Related manuals for HP-UX 11i

Halcro RS232 Specification preview
RS232
Brand: Halcro Pages: 12
Xerox WORKCENTRE C2424 Manual preview
WORKCENTRE C2424
Brand: Xerox Pages: 12
Xerox WorkCentre M118 Getting Started Manual preview
WorkCentre M118
Brand: Xerox Pages: 25
ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE REFERENCE UPDATE 3 Cli Reference Manual preview
BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE REFERENCE UPDATE 3
Brand: ACRONIS Pages: 54
Barracuda Networks NG Network Access Client SP4 Migration Instructions preview
NG Network Access Client SP4
Brand: Barracuda Networks Pages: 10
AMX I!-FTPSENDER Instruction Manual preview
I!-FTPSENDER
Brand: AMX Pages: 12
Extreme Networks EPICenter 4.1 Software Installation Manual preview
EPICenter 4.1
Brand: Extreme Networks Pages: 546
Extreme Networks ExtremeWare 7.5 Command Reference Manual preview
ExtremeWare 7.5
Brand: Extreme Networks Pages: 2546
MACROMEDIA DRUMBEAT 2000 ECOMMERCE EDITION User Manual preview
DRUMBEAT 2000 ECOMMERCE EDITION
Brand: MACROMEDIA Pages: 238
MF DIGITAL Ripstation v4.4.11.0 Operating Manual preview
Ripstation v4.4.11.0
Brand: MF DIGITAL Pages: 43
AMX G4 PANELPREVIEW V1.2 Instruction Manual preview
G4 PANELPREVIEW V1.2
Brand: AMX Pages: 16
National Instruments NI Spectral Measurements Toolkit User Manual preview
NI Spectral Measurements Toolkit
Brand: National Instruments Pages: 35
AMX Modero NXD-1000Vi Datasheet preview
Modero NXD-1000Vi
Brand: AMX Pages: 2
Red Hat APPLICATION STACK 1.4 RELEASE Release Note preview
APPLICATION STACK 1.4 RELEASE
Brand: Red Hat Pages: 22
Royal Registerlink User Manual preview
Registerlink
Brand: Royal Pages: 30
Autodesk AUTOCAD ELECTRICAL 2005 Getting Started preview
AUTOCAD ELECTRICAL 2005
Brand: Autodesk Pages: 88
IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - GRAPH REFERENCE DOCUMENT... Reference preview
PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - GRAPH REFERENCE DOCUMENT...
Brand: IBM Pages: 109
IBM E027SLL-H - Tivoli Monitoring - PC Troubleshooting Manual preview
E027SLL-H - Tivoli Monitoring - PC
Brand: IBM Pages: 310

Brands by name

Popular brands

Load more brands