•
Capacity
—The power supply capacity (watts).
•
Firmware
—The installed power supply firmware version.
Power Discovery Services iPDU Summary
This section is displayed for nonblade servers if the server power supplies are connected to an iPDU.
After iLO is reset, or when an iPDU is attached, it takes approximately 2 minutes for the iLO web interface
to display iPDU summary data. This delay is due to the iPDU discovery process.
Bay
The power supply bay number.
Status
The overall communication-link status and rack input power redundancy, as determined by the iPDU.
Possible values follow:
•
iPDU Redundant
—This
Good
status indicates that the server is connected to at least two
different iPDUs.
•
iPDU Not Redundant
—This
Caution
status indicates that the server is not connected to at least
two different iPDUs. This status is displayed when one of the following conditions occurs:
◦ An iPDU link is not established for all power supplies.
◦ Two or more power supplies are connected to the same iPDU.
The iPDU MAC address and serial number are identical for power supplies whose input power
comes from the same iPDU. If one power supply is waiting for a connection to be established,
the iPDU is listed as
Not Redundant
.
•
Waiting for connection
—This
Informational
status indicates one or more of the following
conditions:
◦ The wrong power cord was used to connect the power supply to the iPDU.
◦ The iPDU and the iLO processor are in the process of connecting. This process can take up to
2 minutes after the iLO processor or the iPDU is reset.
◦ The iPDU module does not have a network (or IP) address.
Part Number
The iPDU part number.
Serial
The iPDU serial number.
MAC Address
The MAC address of the iPDU network port. This value helps you to identify each connected iPDU
because each iPDU has a unique MAC address.
iPDU Link
The iPDU HTTP address (if available). To open the Intelligent Modular PDU web interface, click the
link in this column.
160
Power Discovery Services iPDU Summary
