While the tests are running, the page refreshes periodically. You can stop the tests or manually refresh
the page at any time.
Directory test input values
Enter the following values when you run directory tests:
•
Directory Administrator Distinguished Name
—Searches the directory for iLO objects, roles, and
search contexts. This user must have the right to read the directory.
•
Directory Administrator Password
—Authenticates the directory administrator.
•
Test User Name
and
Test User Password
—Tests login and access rights to iLO. This name does not
need to be fully distinguished because user search contexts can be applied. This user must be
associated with a role for this iLO.
Typically, this account is used to access the iLO processor being tested. It can be the directory
administrator account, but the tests cannot verify user authentication with a superuser account. iLO
does not store these credentials.
Directory test status values
iLO displays the following status values for directory tests:
•
In Progress
—Indicates that directory tests are currently being performed in the background. Click
Stop Test
to cancel the current tests, or click
Refresh
to update the contents of the page with the
latest results. Using the
Stop Test
button might not stop the tests immediately.
•
Not Running
—Indicates that directory tests are current, and that you can supply new parameters to
run the tests again. Use the
Start Test
button to start the tests and use the current test control values.
Directory tests cannot be started after they are already in progress.
•
Stopping
—Indicates that directory tests have not yet reached a point where they can stop. You
cannot restart tests until the status changes to
Not Running
. Use the
Refresh
button to determine
whether the tests are complete.
Directory test results
The
Directory Test Results
section shows the directory test status with the date and time of the last
update.
•
Overall Status
—Summarizes the results of the tests.
◦
Not Run
—No tests were run.
◦
Inconclusive
—No results were reported.
◦
Passed
—No failures were reported.
◦
Problem Detected
—A problem was reported.
◦
Failed
—A specific subtest failed. To identify the problem, check the onscreen log.
◦
Warning
—One or more of the directory tests reported a
Warning
status.
•
Test
—The name of each test.
Directory test input values
255
