Configuring SNMPv3 users
Prerequisites
Configure iLO Settings privilege
Procedure
1.
Click
Management
in the navigation tree.
The
SNMP Settings
page is displayed.
2.
Select a user profile in the
SNMPv3 Users
section, and then click
Edit
.
If user profiles are not configured, the
Security Name
column displays each profile with the value
unset
.
The iLO web interface updates to show the SNMPv3 user options.
3.
Enter the following values:
•
Security Name
•
Authentication Protocol
•
Authentication Passphrase
•
Privacy Protocol
•
Privacy Passphrase
4.
To save the user profile, click
Apply
.
SNMPv3 user options
•
Security Name
—The user profile name. Enter an alphanumeric string of 1 to 32 characters.
•
Authentication Protocol
—Sets the message digest algorithm to use for encoding the authorization
passphrase. The message digest is calculated over an appropriate portion of an SNMP message, and
is included as part of the message sent to the recipient. Select
MD5
or
SHA
.
•
Authentication Passphrase
—Sets the passphrase to use for sign operations. Enter a value of 8 to
49 characters.
•
Privacy Protocol
—Sets the encryption algorithm to use for encoding the privacy passphrase. A
portion of an SNMP message is encrypted before transmission. Select
AES
or
DES
.
•
Privacy Passphrase
—Sets the passphrase used for encrypt operations. Enter a value of 8 to 49
characters.
Deleting an SNMPv3 user profile
Prerequisites
Configure iLO Settings privilege
Procedure
1.
Click
Management
in the navigation tree.
Configuring SNMPv3 users
281
