• iLO and the host server from any
System(s)
list
• The server from the
System
page for iLO
• iLO from the
System
page for the server
The
System(s)
list pages display iLO, the server, and the relationship between iLO and the server.
• To display the iLO web interface, click a status icon.
• To display the
System
page of the device, click the iLO or server name.
Viewing iLO in HPE SIM System lists
iLO management processors can be viewed in HPE SIM. A user with full configuration rights can create
and use customized system collections to group management processors. For more information, see the
HPE SIM user guide.
Receiving SNMP alerts in HPE SIM
HPE SIM supports full SNMP management. iLO supports SNMP trap delivery to HPE SIM. You can view
the event log, select the event, and view additional information about the alert.
Procedure
1.
To enable iLO to send SNMP traps, navigate to the
Management - SNMP Settings
page and
configure the settings for SNMP and SNMP alerting. Enter the IP address of the HPE SIM computer in
the
SNMP Alert Destination(s)
box.
2.
To discover iLO in HPE SIM, configure iLO as a managed device for HPE SIM.
This configuration enables the NIC interface on iLO to function as a dedicated management port,
isolating management traffic from the NIC interface for the remote host server. For instructions, see
the HPE SIM user guide.
For major events that are not cleared, iLO traps appear in
All Events
. To obtain more information
about the event, click
Event Type
.
Configuring iLO and HPE SIM to use the same HTTP port
HPE SIM is configured to start an HTTP session to check for iLO at the default
Web Server Non-SSL
Port
(port 80). If you want to change the port number, you must change it in both iLO and HPE SIM.
• To change the port in iLO, navigate to the
Security - Access Settings
page, and then enter the new
port number in the
Web Server Non-SSL Port
box.
• To change the port number in HPE SIM, add the port to the
config\identification
\additionalWsDisc.props
file in the HPE SIM installation directory.
The port entry must be on a single line with the port number first, and with all other items identical to
the following example (including capitalization). The following example shows the correct entry for
discovering iLO at port 55000:
55000=iLO 5, ,true,false,com.hp.mx.core.tools.identification.mgmtproc.MgmtProcessorParser
304
Viewing iLO in HPE SIM System lists
