Action
• Verify that the configured directory server is the correct host.
• Verify that iLO has a clear communication path to the directory server through port 636 (consider any
routers or firewalls between iLO and the directory server).
• Verify that any local firewall on the directory server is enabled to allow communications through port
636.
Connect using SSL test reports a failure
Symptom
The Connect using SSL test reports the status
Failed
.
Cause
The SSL handshake and negotiation between iLO and the directory server were unsuccessful.
Action
• Enable the directory server for SSL negotiations.
• If you are using Microsoft Active Directory, verify that Active Directory Certificate Services is installed.
Bind to Directory Server test reports a failure
Symptom
The Bind to Directory Server test reports the status
Failed
.
Cause
iLO failed to bind the connection with the specified user name or an anonymous bind.
Action
• Verify that the directory server allows anonymous binding.
• If you entered a user name in the test boxes, verify that the credentials are correct.
• If you verified that the user name is correct, try using other user name formats; for example,
user@domain.com
,
DOMAIN\username
,
username
(called Display Name in Active Directory), or
userlogin
.
• Verify that the specified user is allowed to log in and is enabled.
Directory Administrator Login test reports a failure
Symptom
The Directory Administrator Login test reports the status
Failed
.
Cause
You entered values in the optional
Directory Administrator Distinguished Name
and
Directory
Administrator Password
boxes, and login to the directory server failed.
Connect using SSL test reports a failure
379
