Action
• Right-click Internet Explorer, and then select
Run as administrator
. Start the iLO web interface,
launch the Remote Console, and then boot to the USB key.
• Plug the USB key directly into the server.
SSH issues
Initial PuTTY input slow with iLO
Symptom
During the initial connection to iLO through a PuTTY client, input is accepted slowly for approximately 5
seconds.
Action
• Verify that the client configuration options are correct.
• Clear the
Disable Nagle's algorithm
check box in the low-level TCP connection options.
PuTTY client unresponsive with iLO Shared Network Port
Symptom
When you use a PuTTY client with the Shared Network Port, the PuTTY session becomes unresponsive.
Cause
A large amount of data is being transferred or you are using a Virtual Serial Port and Remote Console.
Action
Close the PuTTY client and restart the session.
Text is displayed incorrectly when using an SSH connection to iLO
Symptom
Extended text configuration beyond the 80 x 25 configuration is not displayed correctly when using SSH.
Cause
SSH access from the text-based Remote Console supports the standard 80 x 25 configuration of the text
screen. This mode is compatible for the text-based Remote Console for most text-mode interfaces.
SSH issues
391
