depending on the failure type. If the controller hardware has a
Failed
status, the top-level controller
status is
Failed
.
•
Controller Status
—Controller hardware status (
OK
or
Failed
)
•
Serial Number
•
Model
•
Firmware Version
•
Controller Type
•
Cache Module Status
•
Cache Module Serial Number
•
Cache Module Memory
•
Encryption Status
—Indicates whether encryption is enabled in the controller.
The following values are possible:
◦
Enabled
◦
Not Enabled
◦
Enabled-Local Mode
—This value is displayed when you do not use a remote key management
server.
•
Encryption ASIC Status
—Indicates whether the ASIC encryption self tests for the controller passed
or failed. A failed status indicates that the controller is not encrypted.
•
Encryption Critical Security Parameter NVRAM Status
—Indicates whether the controller
successfully detected the critical security parameter NVRAM. A failed status means that the controller
is not encrypted.
The encryption settings for a Smart Array controller can be configured by using the Smart Storage
Administrator software.
Drive enclosures
This section provides the following information about the drive enclosures attached to a Smart Array
controller.
• Enclosure port and box numbers
•
Status
•
Drive Bays
—The number of drive bays
•
Serial Number
•
Model
•
Firmware Version
Some enclosures do not have all the listed properties, and some storage configurations do not have drive
enclosures.
Viewing general system information
65
