Ejecting a scripted media device
Prerequisites
• An iLO license that supports this feature is installed.
• Each member of the selected iLO Federation group has granted the Virtual Media privilege to the
group.
Procedure
1.
Click
iLO Federation
in the navigation tree, and then click the
Group Virtual Media
tab.
2.
Select a group from the
Selected Group
menu.
The scripted media device that you eject will be disconnected from all the systems in the selected
group.
3.
Click
Eject Media
in the
Virtual Floppy Status
section or the
Virtual CD/DVD-ROM Status
section.
Servers affected by a Group Virtual Media action
The
Affected Systems
section provides the following details about the servers affected when you initiate
a Group Virtual Media action:
•
Server Name
—The server name defined by the host operating system.
•
Server Power
—The server power state (
ON
or
OFF
).
•
UID Indicator
—The state of the UID LED. The UID LED helps you identify and locate a server,
especially in high-density rack environments. The possible states are
UID ON
,
UID OFF
, and
UID
BLINK
.
•
iLO Hostname
—The fully qualified network name assigned to the iLO subsystem. To open the iLO
web interface for the server, click the link in the
iLO Hostname
column.
•
IP Address
—The network IP address of the iLO subsystem. To open the iLO web interface for the
server, click the link in the
IP Address
column.
Click
Next
or
Prev
(if available) to view more servers in the list.
More information
Exporting iLO Federation information to a CSV file on page 93
iLO Federation Group Power
The Group Power feature enables you to manage the power of multiple servers from a system running
the iLO web interface. Use this feature to do the following:
• Power off, reset, or power-cycle a group of servers that are in the
ON
or
Reset
state.
• Power on a group of servers that are in the
OFF
state.
• View the list of servers that will be affected when you click a button in the
Virtual Power Button
section of the
Group Power
page.
98
Ejecting a scripted media device
