Viewing trusted certificates and records
The
Manage Trusted Certificates and Records
table displays the status of the trusted certificates and
records configured to use SSO with the current iLO management processor.
Procedure
Click
Security
in the navigation tree, and then click the
HPE SSO
tab.
Trusted certificate and record details
Status
The status of the certificate or record. The possible status values follow:
•
The certificate or record is valid.
•
There is a problem with the certificate or record. Possible reasons follow:
◦ The record contains a DNS name, and the trust mode is set to
Trust by Certificate
(only
certificates are valid).
◦ A certificate is configured, and the trust mode is set to
Trust by Name
(only directly imported IP
addresses or DNS names are valid).
◦
Trust None (SSO disabled)
is selected.
◦ The certificate is not compliant with the configured iLO security state.
•
The certificate or record is not valid. Possible reasons follow:
◦ The certificate is out-of-date. Check the certificate details for more information.
◦ The iLO clock is not set or is set incorrectly. The iLO clock must be in the certificate
Valid from
and
Valid until
range.
Certificate
Indicates that the record contains a stored certificate. Move the cursor over the icon to view the
certificate details, including subject, issuer, and dates.
Description
The server name or certificate subject.
Removing trusted certificates and records
Prerequisites
Configure iLO Settings privilege
Procedure
1.
Click
Security
in the navigation tree, and then click the
HPE SSO
tab.
2.
Select one or more trusted certificates or records in the
Manage Trusted Certificates and Records
table.
268
Viewing trusted certificates and records