3.
Click
Delete
.
iLO prompts you to confirm that you want to delete the selected certificates or records.
If you delete the certificate of a remote management system, you might experience impaired
functionality when using the remote management system with iLO.
4.
Click
Yes
.
Configuring the Login Security Banner
The Login Security Banner feature allows you to configure the security banner displayed on the iLO login
page. For example, you could enter a message with contact information for the owner of the server.
Prerequisites
Configure iLO Settings privilege
Procedure
1.
Click
Security
in the navigation tree, and then click
Login Security Banner
.
2.
Enable the
Enable Login Security Banner
setting.
iLO uses the following default text for the Login Security Banner:
This is a private system. It is to be used solely by authorized users
and may be monitored for all lawful purposes. By accessing this system,
you are consenting to such monitoring.
3.
Optional: To customize the security message, enter a custom message in the
Security Message
text
box.
The byte counter above the text box indicates the remaining number of bytes allowed for the message.
The maximum is 1,500 bytes.
TIP:
To restore the default text, click
Use Default Message
.
4.
Click
Apply
.
The security message is displayed at the next login.
iLO security with the system maintenance switch
The iLO security setting on the system maintenance switch provides emergency access to an
administrator who has physical control over the server system board. Disabling iLO security allows login
access with all privileges, without a user ID and password, provided that iLO is configured to use the
Production
security state.
The system maintenance switch is inside the server and cannot be accessed without opening the server
enclosure. When you work with the system maintenance switch, ensure that the server is powered off and
disconnected from the power source. Set the switch to enable or disable iLO security, and then power on
the server. For detailed information about enabling and disabling iLO security with the system
maintenance switch, see the maintenance and service guide for your server.
The system maintenance switch position that controls iLO security is sometimes called the iLO Security
Override switch.
Configuring the Login Security Banner
269
