Enabling AlertMail
Prerequisites
• An iLO license that supports this feature is installed.
• Configure iLO Settings privilege
Procedure
1.
Click
Management
in the navigation tree, and then click the
AlertMail
tab.
2.
Set the
Enable iLO AlertMail
option to enabled.
3.
Enter the following information:
•
Email Address
•
Sender Domain
•
SMTP Port
•
SMTP Server
4.
Optional: To send a test message to the configured email address, click
Send Test AlertMail
.
This button is available only when AlertMail is enabled.
5.
To save the changes, click
Apply
.
AlertMail options
•
Email Address
—The destination email address for iLO email alerts. This string can be up to 63
characters and must be in standard email address format. You can enter multiple email addresses
separated by a semicolon.
•
Sender Domain
—The domain name specified in the sender (From) email address. The sender email
address is formed by using the iLO name as the host name, and the sender domain as the domain
name. This string can be up to 63 characters.
•
SMTP Port
—The port that the SMTP server will use for unauthenticated SMTP connections. The
default value is 25.
•
SMTP Server
—The IP address or DNS name of the SMTP server or the Mail Submission Agent. This
server cooperates with the Mail Transfer Agent to deliver the email. This string can be up to 63
characters.
Disabling AlertMail
Prerequisites
• An iLO license that supports this feature is installed.
• Configure iLO Settings privilege
290
Enabling AlertMail
