To configure the Interconnect (IC) IP addresses in sequence, enter the first Interconnect (IC) IP
address on the Set Interconnect IP Addresses dialog box. The installer then sets the remainder
of the addresses sequentially for all 8 interconnect bays. For example, if 172.16.3.21 is the
starting Interconnect (IC) IP Address, the installer sets the Interconnect (IC) IP Addresses in the
range 172.16.3.21–172.16.3.28.
To configure the Interconnect IP addresses manually, enter each address on the Set Interconnect
IP Addresses dialog box.
14. The wizard lists the IP addresses you specified on the Confirm IC IP Addresses dialog box.
Select
Ok
to continue.
118
Expanding an X9720 or X9320 10GbE cluster by an X9730 module
