6.
If you changed the hostname, select
Reject
, and the following screen appears. (The screen
also appears if your cluster was not found in step 3.) Select
Enter FM IP
.
The wizard asks for information about the server you are using. On the System Date and Time
dialog box, enter the system date (day/month/year) and time (in 24-hour format). Tab to the
Time Zone field and press
Enter
to display a list of time zones. Select your time zone from the
list.
The Server Networking Configuration dialog box defines the server on
bond0
. Note the
following:
•
The hostname can include alphanumeric characters and the hyphen (
–
) special character.
It is a best practice to use only lowercase characters in hostnames; uppercase characters
can cause issues with IBRIX software. Do not use an underscore (
_
) in the hostname.
•
The IP address is the address of the server on
bond0
.
•
The default gateway provides a route between networks. If your default gateway is on a
different subnet than
bond0
, skip this field.
•
VLAN capabilities provide hardware support for running multiple logical networks over
the same physical networking hardware. IBRIX supports the ability to associate a VLAN
134
Expanding an X9320 cluster with an X9320 starter kit
