1.
On the Join a Cluster – Step 2 dialog box, enter the requested information.
NOTE:
Register IP
is the Fusion Manager (management console) IP, not the IP you are
registering for this server.
2.
The Network Configuration dialog box allows you to configure the network on this server to
be compatible with the existing cluster:
•
X9320 10GbE having
bond0
(eth4,5) as a combined cluster/user network, with the
onboard LOM nic ports(eth0-3) used in the configuration of the management network for
iLO and Management Ethernet for MSA storage controllers. To emulate this configuration
on the new server, either add interface eth0 or create a
bond1
composed of onboard
eth0-3 as slave interfaces.
•
X9320 with 1GbE, having the cluster network on
bond0
(eth0-3) and the user network
on
bond1
(eth4-7). To match this configuration on the new server, edit the
bond0
configuration to use use eth0-3 as the slave interfaces, and create
bond1
with eth 4-7
as slave interfaces.
The Network Configuration dialog box lists the Ethernet devices included in
bond0
. If the
slave devices are correct and you do not need to add
bond1
, select
Continue
and go to step
4.
If the slave devices chosen by the installer for
bond0
are not correct for your environment,
select
bond0
and then select
Configure
to customize the interface.
Completing the installation in text mode
137
