4.
The Verify Configuration dialog box shows the configuration for the server. Select
Commit
to
continue.
5.
On the Form a Cluster — Step 2 dialog box, enter the cluster name and specify the IP address
and netmask for the Management Console IP (also called the Cluster Management IP). Also
enter the IP addresses and domain for your DNS servers, and the IP addresses for your NTP
servers.
6.
The Network Configuration dialog box lists the Ethernet devices included in
bond0
. The
bond0
configuration is complete; select
Continue
and go to the next step.
NOTE:
If required, the configuration of
bond0
can be modified at this step by selecting
bond0
in the list of devices and then selecting
Configure
. This should be necessary only if you
have a non-standard configuration and the slave devices chosen by the installer for
bond0
are not correct for your environment.
Completing the installation in text mode — unified network
15
