2 Million Imp - Preventive Maintenance Guide - HP Indigo press 5000
CA294-00570
rev 01
page 7 of 18
2 million imp. maintenance (continued)
Clean the lower feed roller and pinch rollers (IFR) with
IPA.
Check the duplex conveyor-impression drum gap, and
adjust, if necessary.
Replace perfector suction cups.
Clean Stacker paper path with IPA.
Check Stacker flipping wheels.
Check that the paper buckle is correct. Adjust if
necessary.
Perform the suction cup margin adjustment wizard.
Perform the full placement adjustment wizard.
Utility cabinet
Check oil level in solid air compressor.
Clean vacuum pump filters. See "Appendix B -
Vacuum pump maintenance" on page 14.
Drain water separator - open service valve for 30
seconds.
Chiller unit
Check water level.
Clean the water filter, and replace, if needed. See the
chiller manual.
Inline densitometer
Print a new reference densitometer full calibration
strip if one is not available, and perform the validation
procedure. See the HP Indigo service instruction for
the Inline Densitometer.
Instruct the operator to store the strip in a dark, clean
place.
Lubrication
Make sure that all lubrication points have been oiled
and greased properly, including the exit elevator
gears and chains. See "Appendix C - Grease and oil
types" on page 17. For a complete list, check the
User Guide, or view the press On-line documentation
videos (OPD).