EN
Adjusting the substrate tension 9
Using the meter counter
The counter enables you to measure the amount of substrate that has been rewound. The
counter displays all values in meters.
From the counter, you can do the following:
z
To set the preset value, press the UP button for the digit that you want to increase.
z
To reset the counter value, press RESET.
z
To enable and disable the counter keypad, press LOCK.
Table 1-3. Web tension controller settings
Substrate thickness
Web tension controller setting
12 - 50 µm
1 - 2 kg/cm
2
(0.5 bar)
50 - 150 µm
2 - 5 kg/cm
2
(1.0 - 2.5 bar)
150 - 250 µm
4 - 7 kg/cm
2
(2.0 - 3.5 bar)
Table 1-4. Pressure-tension conversions
Pressure
Tension
0 bar
0.5 kg/cm
2
1 bar
2.2 kg/cm
2
2 bar
4.1 kg/cm
2
3 bar
6.1 kg/cm
2
4 bar
8.0 kg/cm
2
5 bar
10.0 kg/cm
2
6 bar
11.9 kg/cm
2
Figure 1-9. Counter
1
Counter value
2
Preset value
3
UP buttons for the six digits of
the preset value
1
2
3
