Replace printheads (cartridges)
To replace the printheads (cartridges)
1.
Check that power is on.
2.
Remove the printhead.
a.
Open the front door of the printer.
b.
Open the printhead access door. Press and hold the Resume button (
) for about three seconds.
Wait for the print carriage to move to the center and stop moving.
NOTICE:
The instructions here are only applicable in this section. After you have set up the
printer, do not open the printhead latch unless instructed to do so.
c.
Push down to open the printhead latch.
36
Chapter 4 Manage ink and printhead
ENWW