Status lights
●
●
●
Printhead priming status indicators
●
Error light, Warning light, and Resume light
●
Power button light
●
Status indications during normal operation
Status
Description
On
The printer is on.
Off
The printer is off.
Dimmed
The printer is in Sleep mode. The printer automatically enters Sleep mode after 5 minutes of
inactivity. After 2 hours of inactivity, the printer automatically turns off if not connected to a
computer.
Blinking
The printer is processing a job. To cancel the job, press the Cancel button (
).
Fast blinking
–
The printhead access door is open. You must close the door to continue printing.
–
The printer is in an error state. You can resolve the error by following the onscreen
messages from the computer. If you do not see any onscreen messages, try printing a
document to generate an onscreen message.
●
Status indications during printer firmware updates
Status
Description
Blinking
The printer firmware update is in progress.
On
The printer firmware update is complete.
Printhead lights
●
Power button light is on; and Printhead light of the printhead having an error is blinking quickly.
All other control panel lights are blinking quickly.
ENWW
Status lights
7