HP Integrity BL860c i2 Base Model
HP Integrity BL860c i2
(2P)
AD399A
Processor(s)
Supports up to two (2)
processors
Two (2) processor sockets; processor modules are configured to order
Cache Memory
Included with processors
Memory
Twenty four (24) DIMM sockets; memory DIMMs are configured to order.
Network Adapter
Four (4) NIC ports via (2) NC532i Dual Port Flex-1010GbE Multifunction Server
Adapter
NOTE:
Flex-10 capability requires OS drivers and the use of an HP Virtual
Connect Flex-10 10GbE Ethernet module. Learn more at:
www.hp.com/go/virtualconnect
NOTE:
BL8x0c i2 server blades require Virtual Connect 3.00 or later when used
in Virtual Connect configurations
NOTE:
Each part is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP
BladeSystem c-Class interconnect components.
Storage Controller
One (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
Integrated HP Smart Array p410i SAS Controller
Hard Drives
Two SFF SAS drive bays; hard disk drives are configured to order
IO expansion
Three PCIe mezzanine card slots (PCIe Gen2 x8 interface); mezzanine cards are
configured to order.
Optical Drive
None internal to blade server
Integrity iLO 3
Integrity iLO 3 and Integrity iLO 3 Advance Pack license included.
Form Factor
Up to 8 supported in HP BladeSystem c7000 Enclosure
Up to 4 supported in HP BladeSystem c3000 Enclosure
QuickSpecs
HP Integrity BL860c i2 Server Blade
Models
DA - 13624 Worldwide — Version 19 — April 18, 2014
Page 22