Appendix C
Utilities
EFI/POSSE Commands
179
Syntax
errdump [cpe | cmc | init | la | clear]
Parameters
cpe
dumps the Corrected Platform Error log
cmc
dumps the Corrected Machine Check log
init
dumps the Initialization log
la
dumps the Logic Analyzer log
clear
erases all of the logs (cpe, cmc, init, la)
Operation
If a user enters no parameters, the usage is displayed. Otherwise, the specified error log is displayed. Adding
-n to the clear parameter disables the confirmation prompt. (The
errdump
command can also be accessed
through the System Configuration menu.)
info
Allows the user to display most server information.
Syntax
info [ -b] [target]
Parameters
target:
valid targets are:
all
display everything
cpu
display information on cpus
cache
display information on cache
mem
display information on memory
io
display information on io
boot
display boot-related information
chiprev display information on chip revisions
fw
display firmware version information
sys
display system information
warning
display warning and stop boot information
Example C-10
info all
Command
Shell> info all
SYSTEM INFORMATION
Date/Time: Sep 24, 2004 17:27:17 (20:04:09:24:17:27:17)
Manufacturer: hp
Product Name: server rx2620
Product Number: AB333A
Serial Number: USR0418201
UUID: 336B81EE-A9AF-11D8-9653-3F6E1533CC31
System Bus Frequency: 200 MHz
PROCESSOR MODULE INFORMATION
# of L3 L4 Family/
CPU Logical Cache Cache Model Processor
Module CPUs Speed Size Size (hex.) Rev State
------ ------- -------- ------ ------ ------- --- ------------
0 1 1.3 GHz 3 MB None 1F/01 B1 Active
MEMORY INFORMATION
---- DIMM A ----- ---- DIMM B -----