Introduction
Server Components
Chapter 1
19
Server Dimensions
Table 1-1 shows the dimensions and weight of the rx2620 server.
Server Components
The following components make up the HP Integrity rx2620 server.
Processor
•
1.4 GHz/12 MB L3 cache dual-core processor
•
1.6 GHz/18 MB L3 cache dual-core processor
Memory
•
12 memory DIMM slots
•
256 MB, 512 MB, 1 GB, 2 GB, and 4 GB standard 184 pins 2.5 V DDR1, CL2, registered, ECC
•
133 MHz memory bus frequency, 266 MTransfers/s data, 8.5 Gb/s peak data bandwidth
•
Minimum memory size of 1 GB with four 256 MB DIMMs
•
Maximum memory size of 32 GB with eight 4 GB DIMMs
•
Upgrades must be made by quads of DIMMs
•
DIMMs loaded by quads enable interleaved mode and chip spare
PCI Riser
•
Four independent PCI-X 133 MHz 64 bit, 3.3 V, 15 W slots. There is no 5 V card and hot plug support
NOTE
Some 25 W cards are supported. See the following slot matrix (by server):
http://www.docs.hp.com/en/SSM1-EL/slotmatrix.htm
For more information regarding specific I/O cards, see:
http://www.docs.hp.com/en/netcom.html
Table 1-1
Server Dimensions
Dimensions
Value
Rack units
2U
Height
8.6 cm (3.4 in.)
Width
48.3 cm (19.0 in.)
Depth
67.9 cm (26.8 in.)
Weight
•
Min
•
Max
17.5 kg (38.6 lb.)
22.2 kg (49.0 lb.)