Appendix C
Utilities
Using the Boot Configuration Menu
203
Set User Interface
Set User Interface lets the user change the legacy boot manager user interface.
Set System Wake-On LAN
Set System Wake-On LAN lets the user enable/disable the server Wake-On_LAN settings.
Set System Defaults
Set System Defaults lets you select server default settings.
Using the Security Configuration Menu
The Security Configuration Menu (on servers with EFI firmware version 2.0 or higher) includes the following
options:
•
Administrator Password Options
•
User Password Options
Administrator Password Options
Administrator Password Options lets the user set and clear the administrator password.
User Password Options
User Password Options lets the user set and clear the administrator password.
If you forget your passwords, they can be reset using an iLO MP command. Follow these steps.
•
If your server has an iLO Manageability card:
Run the iLO Manageability card bp command to reset the administrator and user passwords (see “iLO
MP Command Reference” on page 211).
•
If your server does not have an iLO Manageability card, you must reset the passwords using a jumper on
the system board:
Step 1.
Power down the server and unplug the AC power cord.