Appendix C
Utilities
iLO MP
208
Interacting with the iLO MP
To interact with the iLO MP command line interface, perform the following steps:
NOTE
On initial server installation, the iLO MP has two default user accounts:
•
All Rights (Administrator) level user; login = Admin, password = Admin (both are case
sensitive).
•
Console Rights (Operator) level user; login = Oper, password = Oper (both are case
sensitive).
For security reasons, HP recommends that you use the
UC
command during the initial logon
session to modify default passwords (enter
CM
at the
MP>
prompt, and enter
UC
at the
MP:CM>
prompt).
IMPORTANT
If default users such as Admin are modified, configuration parameters in HP Systems Insight
Manager (HP SIM) need to be changed for the group actions feature to work properly. For more
information regarding HP SIM, refer to the HP Systems Insight Manager User and
Installation Guide at the following web site:
www.hp.com/go/hpsim
.
Step 1.
Log in using your iLO MP user account name and password.
NOTE
If you are logged in, the
iLO MP Main Menu
displays. To follow this procedure, make
sure you are at the
iLO MP Main Menu
. Use
Ctrl+B
to return to the
iLO MP Main Menu
.
Step 2.
Use the iLO MP menus and commands as needed. Main Menu commands are shown in “iLO MP
Main Menu”. You can access commands not displayed in the iLO MP Main Menu in command mode
by first using the
CM
command at the
MP
prompt. You can display a list of available commands using
the iLO MP help function. Initiate the help function from either the iLO MP Main Menu or the
Command Menu prompts by entering
HE
followed by
LI
. You can return to the iLO MP Main Menu
by pressing
Ctrl+B
.
Step 3.
Log out using the
X
command (enter
X
at the
MP>
prompt) after returning to the iLO MP Main
Menu.
iLO MP Main Menu
Following are the iLO MP Main Menu commands:
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Create OS Session
HE: Main Menu Help
X: Exit Connection