Removing and Replacing Components
ESD Information
Chapter 4
46
ESD Information
Follow the procedures listed below to ensure safe handling of components and to prevent harm to both you
and the HP Integrity rx2620 server:
•
Use an anti-static wrist strap and a grounding mat, such as those included in the Electrically Conductive
Field Service Grounding Kit (HP 9300-1155).
•
Handle accessory boards and components by the edges only. Do not touch any metal-edge connectors or
any electrical components on accessory boards.
•
Do not wear clothing subject to static charge build-up, such as wool or synthetic materials.
Service Tools Required
Service of this product may require one or more of the following tools:
•
IPF CPU Install Tool Kit (P/N 5069-5441), consisting of:
•
Disposable ESD Kit
•
Label-less CPU install tool (2.5mm hex and Torx 15)
•
1/4 inch flat blade screwdriver
•
Phillips No. 1 Screwdriver
•
ACX-10 Torx screwdriver
•
ACX-15 Torx screwdriver
•
ACX-25 Torx screwdriver