Learning Input Methods
User’s Guide
3–13
Checking the Keyboard Connection
After you’ve connected the keyboard to your iPAQ Pocket PC, if
you press a key on the keyboard and the letter does not register,
perform the following steps to check your keyboard connection:
1. Be sure the Thumb Keyboard is securely connected to your
iPAQ Pocket PC.
2. If the connection is secure, go to
Start > Settings > System
tab
> iPAQ Keyboard
and be sure the
Enable Keyboard
check box is checked.
3. Insert your cursor in the
Test here
box and tap the keyboard
to see if it types characters in the box.
4. If characters appear in the Test here box, tap
OK.
5. Use your stylus to press the
Reset
button on the left side of
your iPAQ Pocket PC.
Disconnecting the Keyboard
To disconnect the keyboard from your iPAQ Pocket PC, push in
the two buttons on the side of the keyboard to release it, then pull
the Pocket PC from the keyboard.
Configuring the Keyboard
You can configure several features on your Thumb Keyboard. To
customize your keyboard:
1. On your Pocket PC, select
Start > Settings > System
tab
>
iPAQ Keyboard.
2. Select the
Setting
tab.
3. Do one or more of the following:
❏
Tap the
Enable Keyboard
check box to enable or
disable the keyboard functionality.
❏
Tap the
Enable Sound
check box to hear a click every
time you press a key.
